REAPER Audio Workflows
REAPER keyboard shortcuts for recording: the defaults to learn and the ones to add
Published November 15, 2026 · Updated November 15, 2026
You do not need a 200-line cheat sheet to record in REAPER. Learn about ten defaults: Ctrl+R to start and stop recording, Space to stop, Ctrl+S to save, Ctrl+Z to undo, Ctrl+T for a new track, S to split and M for a marker. Then add the few that REAPER leaves blank, such as the metronome, which has no default shortcut. Press ? to open the Action List, find the action, click Add and press a key. On a Mac, use Cmd where this article says Ctrl and Option where it says Alt.
Shortcuts matter more when you record than when you mix, because when you record you are often the engineer and the singer at once. Every trip to the mouse between takes is time away from the mic and a chance to lose the feel of the last take. The goal here is a small set you will actually remember, not every action REAPER has.
Everything below comes from the official REAPER user guide (version 7.85). It lists Windows keys and tells Mac users to substitute Cmd for Ctrl and Option for Alt. These are factory defaults. If you have imported someone else's key map or settings, yours may differ, and Help, Key bindings and mouse modifiers shows what your copy actually uses.
The defaults worth learning first
| What it does | Windows | macOS |
|---|---|---|
| Start recording, and stop recording keeping the take | Ctrl+R | Cmd+R |
| Stop (playback returns to where it started) | Space | Space |
| Pause where you are | Enter | Enter |
| Save the project | Ctrl+S | Cmd+S |
| Undo / redo | Ctrl+Z / Ctrl+Shift+Z | Cmd+Z / Cmd+Shift+Z |
| Open the undo history window | Ctrl+Alt+Z | Cmd+Option+Z |
| Insert a new track | Ctrl+T | Cmd+T |
| Split items at the edit cursor | S | S |
| Add a marker at the cursor | M | M |
| Jump to the previous / next marker | [ / ] | [ / ] |
| Go to the previous / next track | Ctrl+Alt+Up / Ctrl+Alt+Down | Cmd+Option+Up / Cmd+Option+Down |
| Toggle snap | Alt+S | Option+S |
| Open the Action List | ? | ? |
The Mac column applies the guide's Ctrl to Cmd and Alt to Option rule. It was not checked key by key on a Mac, so if one does nothing, look it up in the Action List as described below.
If you only learn three, make them Ctrl+R, Ctrl+S and Ctrl+Z. Saving often is cheap insurance, and if an undo goes further than you meant, the undo history window can take you back to any earlier point.
Ctrl+R and Space do not stop recording the same way
This one catches people out. The guide says that if you stop with the Record button or Ctrl+R, the new recording is saved automatically. If you stop with Space or the Stop button, REAPER can show a dialog asking whether to save or delete what you just recorded. Whether that dialog appears depends on the recording prompt option in your preferences.
Neither is wrong. Ctrl+R is the fast way to keep everything. Space gives you a chance to throw away a take you already know is bad. Just know which one your hand is reaching for. If you are new to the whole process, start with how to record vocals in REAPER step by step.
Add the shortcut REAPER leaves blank: the metronome
The guide's list of main toolbar tools says the metronome has no default shortcut. You can click its toolbar button, but if you switch the click on and off between takes, a key is quicker. Here is how to assign one. The same steps work for any action.
Open the Action List
Press ?, or choose Actions, Show action list.
Check the key is free
Click Find shortcut and press the key you want. If nothing uses it, REAPER tells you the shortcut was not found. Type lower case unless you really mean Shift plus that letter. Do not pick a key from a cheat sheet without checking, because many single letters are already taken.
Find the action
Type metronome in the Filter box and select the action that toggles the metronome on and off. Any shortcut an action already has is shown next to it.
Assign the key
Click Add. In the box that opens, the guide recommends unticking Automatically close window on key/MIDI input so a stray keypress is not assigned by mistake. Press your key, check it is the one shown, and click OK.
If the key is already used elsewhere, REAPER warns you and asks whether to change that assignment. Read the warning before you agree, because you may be taking away a default you rely on. To remove a shortcut later, select the action, click the shortcut shown under the list and click Delete.
One key to stop and keep, one key to stop and bin
REAPER has a separate shortcut section that is only active while you are recording, called Main (alt recording). The guide's own example uses it to stop recording without the save or delete dialog:
- In the Action List, switch the section drop-down to Main (alt recording).
- Filter on
stop save, select Transport: Stop (save all recorded media), click Add and pressS. - Filter on
stop del, select Transport: Stop (DELETE all recorded media), click Add and pressD. - Turn on Use alternate keyboard section when recording in Options, Preferences, General, Keyboard/Multitouch.
Now, while recording, S stops and keeps the take and D stops and deletes it. When you are not recording, S goes back to splitting items as normal. Be careful with the delete key. It removes everything from that pass, so only use it for takes you are sure you do not want. If you like to keep every attempt for comping the best parts together later, skip the delete shortcut entirely and clear out unused takes afterwards with the steps in cleaning up a bloated REAPER project folder.
When a shortcut seems to do nothing
- The wrong window is in front. Shortcuts belong to a section. A key you set in the Main section does not reach an open FX window or the MIDI editor unless you set its scope to global in the Add box. Global shortcuts show
(g)next to them in the list. Global + text also works while you are typing in a text field. - It was reassigned. Use Find shortcut to see what the key does now. Importing a key map or someone else's settings can change a lot at once.
- You are thinking of another DAW. Many keys differ between programs. Check the Action List rather than guessing.
- You want the full picture. Help, Key bindings and mouse modifiers opens a searchable, printable list of every current shortcut in your browser.
Prefer clicking? Put the action on a toolbar
Some actions you use rarely are better as a button than a key you will forget. Right-click an empty area of the main toolbar and choose Customize toolbar. Select the item you want your new button to appear before, click Add, choose the action, and click Select/Close. You can right-click the new entry to choose an icon or give it a short text label. Reset puts the toolbar back to its default if you change your mind. REAPER also supports extra custom toolbars if the main one gets crowded.
Back up your shortcuts once you have set them
Rebuilding a key map from memory after a reinstall is the kind of chore that makes people give up on custom shortcuts. In the Action List, click the Key map button near the bottom right and choose Export shortcut keymap file. REAPER saves a .ReaperKeyMap file, by default in the KeyMaps folder inside REAPER's resource folder. Copy it somewhere outside that folder, the same way you would back up and archive a REAPER project. The same menu has Import to load it on a new machine and Reset all shortcut binding to factory defaults if your changes ever get out of hand. Toolbars and menus export separately, from the Customize menus/toolbars window.
Tutorials, forum answers and this article all assume default keys. If you remap a common key such as S or M, instructions written for everyone else will stop matching your setup. Changing only blank actions, like the metronome, avoids that.
What shortcuts will not do
- They will not change how anything sounds. A faster session is not a better recording, and level, mic distance and the room still decide the take.
- They will not fix latency or a slow computer. If REAPER lags when you press record, look at your audio buffer and driver settings, not your key map.
- They do not need to be learned all at once. Learn the table above, add one or two blank actions you use every session, and stop there until something else annoys you enough to deserve a key.
Learn Ctrl+R, Space, Ctrl+S, Ctrl+Z, Ctrl+T, S and M. Know that Ctrl+R keeps the take while Space may ask. Give the metronome a free key through the Action List, check every key with Find shortcut first, and export your key map once it works.
Sources
- Cockos, Up and Running: A REAPER User Guide v7.85 (official HTML edition), read November 15, 2026. Section 2.6 Navigation and Zooming (Mac users substitute Cmd for Ctrl and Opt for Alt; Ctrl Alt Up and Down to go to the previous and next track); 2.15 Managing the Play Cursor (Stop or Spacebar returns the play cursor, Pause or Enter pauses); recording chapter note (stopping with the Record button or Ctrl R saves automatically, Space or Stop shows the save or delete dialog; Ctrl T inserts a track); 5.19 The Main Toolbar (Ctrl S save, Ctrl Z undo, Ctrl Shift Z redo, Alt S snap, metronome has no default shortcut); 2.28 Undo History (Ctrl Alt Z); chapter 15: 15.2 Actions Essentials (the ? key opens the Action List; Help, Key bindings and mouse modifiers), 15.3 Find shortcut and filtering, 15.5 Creating a New Keyboard Shortcut, 15.6 Global Shortcut Overrides, 15.7 Removing a Shortcut, 15.8 Action List Sections (S splits, M inserts a marker by default), 15.10 Keyboard Shortcuts for Recording, 15.11 ([ and ] go to the previous and next marker in the main window), 15.14 Exporting and Importing Key Maps, Customizing REAPER Toolbars and 15.25 Additional Custom Toolbars. dlx.reaper.fm/userguide/html
- Community context only, not technical proof: the number of dedicated REAPER shortcut cheat sheets and toolbar tutorials in current search results (for example a Cockos-hosted keyboard shortcut PDF, Sound On Sound's REAPER menus and toolbars workshop, and REAPER Blog toolbar posts) shows the topic is widely searched, but these were not used for any key assignment above. soundonsound.com
All sources checked on November 15, 2026. Shortcuts are REAPER factory defaults as documented in the v7.85 guide and can change between versions or with an imported key map. The macOS column applies the guide's modifier rule and was not tested on a Mac. No link above is an affiliate link.